SEAM360: Non Destructive Seam Inspection for Beverage Cans

A 360 degree non-destructive measurement of the can's double seam

The SEAM360 is the ultimate machine vision double seam can inspection gauge. The system is used for both three piece and two piece beverage and food cans. The SEAM360 comes in models for beverage, food, oil filters and even a fully automatic model for operator-free measurements.

Conventional seam scan technology sample seams at 2-3 points around the can. However, what about the points in between the sample points?

If you measure at a few points around the seam, using a micrometer or seam thickness gauge and destructive tests with a double seam scope – you’re missing most of your information!

Problems can arise as close as a few millimeters from your measurement point and you will not detect them. This means that if a problem is missed, it can be a few more shifts before the problem is detected – resulting in many bad cans being closed or even shipped!

Instead of trying to measure every can (100%) but at a few measurement points, the SEAM360 measures every can’s total external surface area. This exposes many issues that were so far invisible to the operator.

X-ray systems measure at only a few points around the can, and pressure systems on the seamer can miss even obvious issues because of their technology (e.g., false seams).

Using non-destructive optical technology, Quality By Vision’s new SEAM360 is capable of detecting all of these double seam issues in a fraction of the time it takes to do a seam test and with no operator influence on the results. SEAM360 is the first system capable of checking every point on the seam, so there’s no chance of missing anything.

This means problems with the seamer, loose or tight roll and chuck setups, double seam issues (including rare ones) are easily detectable for any seamer head.

The intuitive software clearly points out what the problem is and where it occurred.

Many tooling and seamer related issues can be fixed quickly, using the Clearance Gauge.




  • Resolution: 0.0002" (0.005 mm) or better for seam thickness and length
  • Interface: USB2
  • Optical units: Laboratory (manual), In-line (automatic)
  • Scan time (one can): about 8 seconds
  • Measurement cycle time (6 cans): about 2 minutes


     I give you my permission to contact me